Electricity & electronics - Robotics, learn by building

4.6
3 120 комментариев
Payment
Обучение платное
Certificate
Сертификация бесплатная
Duration
10.5 часов курса
О курсе

You can open all kinds of doors for advancement in so many careers with a basic understanding of electronics. Think of all of the fields and hobbies that involve electronics to some degree! This "Robotics: Learn by building" series of courses focuses on robotics - which itself is a very diverse field that has application in everything from industry, manufacturing, laboratory work, or military, even in home automation. 

Updated January 1, 2020

With over 17,000 students enrolled and more than 1,300 five star ratings, students aged 8 to 60+ have enjoyed the course and projects.

In this module 1 course, you will build electronic circuits, actually make some electronic components from scratch and use them in your circuits, learn about electricity, soldering skills, and basic analog electronics.  You'll need some basic math skills and that's it! No prior knowledge of electricity of electronics is required, and yet by the end of this course you'll have built functioning electronic circuits like light flashers, sound effects, and controlling the robotics engineer's best friend, the servo motor which is a motor that turns to a specific direction at your command. You will have even connected that servo motor up to read electrical impulses from the muscles in your arm to control the motor bionically. All courses have captions for the hearing impaired.

Start through the lessons today to begin your personal education journey towards your goals - a horizon now filled with so many more opportunities because of your new-found knowledge.


Course materials:

You will need electronic parts and a breadboard, which you can purchase as an accompanying kit (the Analog Electronics Kit) or provide your own.

The first section of the course (available for free preview) explains what the tools and parts are and what you will need if you are supplying your own electronic parts. 

Tools needed: a multimeter, soldering iron and solder, wire,

This course is the prerequisite for the module II course which is digital electronics where you will work with a computer-on-a-chip and hook that computer up to the real world.  In module III you'll learn robotic drive systems and physics, and gain a wide variety of skills in prototyping so you can actually build your own robots and manufacture your own parts.  In module IV, you'll culminate all you've learned so far as you build a 3D printer from scratch, hook it up to a desktop computer and make your own plastic parts.  The 3D printer is, in effect, a robot which you can then use to make parts for your other robot designs. In module V you can take your robot design and construction skills to the next level with a hands-on approach to autonomous robotic systems: learning about various sensors to know where you are and what your robot is doing, GPS navigation, basic artificial intelligence, powerful microchips known as FPGA's where you literally design a custom circuit on the chip, vision systems and more.

Программа
Even basic electricity can be complicated and fun
Basic electricity, resistance, conductance and electrical saftey
Introduction & whatcha need
Let's go over materials and tools you'll need for this course.
Parts & Materials List
DC electricity
Let's start from zero: Just what IS electricity and electronics anyway?We'll discuss electrical safety and DC electricity.
AC electricity
Let's now move on to AC electricity and how it's different than DC.We'll talk more about electrical safety as well as AC voltages tend to be far higher than DC.
Ohm's law and power
Continuing to learn the basics of voltage/resistance/current, we'll now show what Ohm's law is (along with really bad puns), how to use it and easily remember it.
Using multimeters
Student's requested a short lesson on how to use the multimeter. So, here it is!
Resistors
So what good is a "resistor" anyway?And what happens if we hook them up in different ways?We find out in this lesson.
Schematic diagrams and resistors in parallel
Schematic diagrams are simply drawings which are like blueprints for electrical/electronic circuits.Here we start learning the basics of schematic drawings so we can build a circuit from any schematic we can get.
Variable resistors
Variable resistors are a very useful part, but are mysterious in how they work. in this lesson we remove the mystery by opening one up and then making one for ourselves from scratch.
Capacitors
What is a capacitor?We remove the mystery by actually scratch-making one for use later on in a circuit, and then discuss just how these very simple components work.
Diodes & LED's
In this lesson we are introduced to our very first semiconductor, the diode.We then move on to Light Emitting Diodes which are now extremely common.
Требования
  • Basic math skills, as well as some basic tools and electronic parts (parts & tools list is in the first lesson)
Что Вы изучите?
  • develop and build analog electronics circuits
  • you will build multiple circuits from sound buzzers to bionics where we actually control a servo motor by reading signals from your muscles
Лекторы
Ian Juby
Ian Juby
Robotics engineer & Educator at Tech Valley Science Centre

I've been an instructor in science and technology for 30 years. I got my start teaching at a science camp when I was 16. I also taught technology at the high school level for 10 years. I am a graduate of robotics engineering from Canadore College, North Bay, Ontario, and conducted research and development for multiple innovations over the years, including work with an Eastern Ontario company producing cool suits and hot suits for harsh environments.  Our suits were used on board the space shuttle while it was in operation.

My interests have gone far beyond robotics, having written multiple scientific papers, published in peer reviewed journals and a book, wrote a book on video production, and am currently a railroader, working for Canadian National Railroad in Ontario. My passion is still for teaching and this can be seen even in railroading where I produced a video series on how to read Canadian railroad signals which is now being used in conductor courses to instruct the students on how to read the signals. I traveled on the road for ten years with a traveling museum I collected and constructed, speaking on the creation/evolution debate and have produced and hosted a television show on the topic for five years now.

Платформа
Udemy
Курсы Udemy подойдут для профессионального развития. Платформа устроена таким образом, что эксперты сами запускают курсы. Все материалы передаются в пожизненный доступ. На этой платформе можно найти курс, без преувеличений, на любую тему – начиная от тьюториала по какой-то камере и заканчивая теоретическим курсом по управлению финансовыми рисками. Язык и формат обучения устанавливается преподавателем, поэтому стоит внимательно изучить информацию о курсе перед покупкой.
Рейтинг
4.6
2 015
891
202
24
25